Chassis kit - User manual

User Guide for the Frame

Package Contents

  • 4x wooden bars (frame sides)
  • 4x corner pieces
  • 2x metal wall hooks
  • 2x screws
  • 4x metal clips

Step 1: Assembling the Frame

  1. Arrange the 4 wooden bars along each edge of your canvas after removing the adhesive protection.

  2. Insert the corner pieces into the ends of the bars. The corner pieces hold the bars together at the corners. Make sure the bars fit properly into the slots of the corner pieces for a solid assembly.

Step 2: Attaching the Metal Clips

  1. Once the frame is assembled, use the metal clips to secure the canvas inside the frame. Place a clip at each corner and press gently so that the canvas is well stretched and held in place.

Step 3: Installing the Wall Hooks

  1. Measure the spot where you want to hang your frame. Use a spirit level to ensure the frame will be straight.

  2. Attach the metal hooks to the wall using the screws provided. Use a screwdriver or drill to fix the screws securely into the wall.

Step 4: Hanging the Frame

  1. Hang the frame on the hooks attached to the wall. Make sure it is securely in place and properly aligned.

Step 5: Final Adjustment

  1. Check that the frame is straight using a spirit level. If necessary, adjust it slightly to ensure it is perfectly aligned.

Maintenance

  • To clean the frame, use a soft, dry cloth. Avoid using abrasive or chemical cleaning products.